Pool and Spa Permit Drawings for Pool Builders and Designers
Pool builders sell the design and the build, but most building departments still want a clear permit set before work starts. Drawing each one in-house ties up the people who should be selling and managing jobs.
Studio MINIM drafts pool and spa permit drawings for pool builders, landscape designers and architects. Our drafting work includes pool projects, and we work from your design, your engineer's details and the local checklist.
What a pool permit set usually needs
Requirements vary by city and county, so we start from the local checklist. A typical residential set includes:
Site plan with the pool and spa located, setbacks to property lines and structures, easements and the equipment pad.
Pool plan with dimensions, depths, steps, benches, spa and features.
Sections through the shallow end, deep end and spa, showing depths and the shell profile.
Barrier plan: fences, gates, self-closing and latching hardware, and door alarms or other measures the code requires.
Equipment layout: pump, filter, heater and sanitation equipment, with the electrical and gas information your engineers provide.
Drainage and grading notes, if the jurisdiction asks for them.
Structural details from your engineer, carried onto the set where the jurisdiction expects them.
Codes we draft to
We draft to the client's governing codes and local amendments. For US pools and spas that usually means the ISPSC or the pool provisions the jurisdiction has adopted, the IRC or IBC depending on the property, the electrical code requirements your engineer specifies, and local barrier rules. Commercial and hotel pools can also fall under state or county health department rules and ADA access requirements. Your designer or engineer of record decides the code path; we draw to it.
Residential and hospitality pools
Backyard pools and spas for custom homes and remodels (see Custom home drafting).
Hotel and motel pools, where barrier, access and health rules are stricter (see Hotel and motel drafting).
Pool houses and cabanas, drafted as small buildings with their own plans and elevations.
Working with your templates
Many pool builders have a standard sheet layout and typical details. Send one or two recent sets, and we will set up your title block, typical notes and details so every new job starts from your standard.
Revisions and corrections
When the building department sends corrections, send them to us with your direction. We revise the sheets, cloud the changes and return a resubmittal set.
Who seals and submits
We are a drafting and BIM production team. We are not your architect or engineer of record. Your licensed architect, engineer or designer reviews the set, seals or signs it where required, and submits it to the authority. Structural and electrical design stays with your engineers. We draft to the codes and local amendments that govern your project, as you or your designer of record direct.
Deliverables and file formats
PDF permit sets ready for submission, plus DWG source files. RVT and IFC are available if your team works in BIM.
How a project runs
Send a sample set. Share a recent drawing set, your mark-ups or the inputs you have, and tell us what you need back.
Quote and schedule. We reply with the sheet list, the hours, the cost and a dated schedule.
Set up. We load your title block, layers, text styles and Revit templates, or work to the standards you send.
Draft and check. Sheets are drafted, then checked against your mark-ups and the checklist agreed at the start.
Deliver and revise. You receive DWG, RVT, PDF or IFC files as agreed, and we turn your review comments into a revised set.
Team, rates and working hours
Studio MINIM's production team is 25 people, and the team is Revit-certified. Rates start from $35/hour. We confirm the hours and the cost for your set in a written quote before any work starts, so you know the number before you commit.
Our team works on IST (UTC+5:30), which is 10.5 hours ahead of US Eastern time and 13.5 hours ahead of Pacific time in winter. In practice, mark-ups you send at the end of your day are worked on while your office is closed, and review calls can be set for your morning.
Related pages
Frequently asked questions
What drawings do I need for a pool permit?
Usually a site plan, pool plan, sections, barrier plan and equipment layout, plus engineering details. The local checklist decides the exact list.
Which pool codes do you draft to?
The codes and local amendments that govern your project, such as the ISPSC or the adopted pool provisions, the IRC or IBC, and local barrier rules.
Do you design the pool structure?
No. Structural and electrical design stays with your engineers. We draft the permit set and include their details.
Can you work from my standard pool templates?
Yes. Send one or two recent sets and we will set up your title block, notes and typical details.
How much do pool permit drawings cost?
Rates start from $35/hour. We quote after seeing a sample set and the local checklist.
