top of page

Permit Drawing Services: Plan Sets Your Designer of Record Can Seal and Submit

A permit set has one job: to show the building department that the project meets the code that applies to it, clearly enough that the reviewer can approve it without a long list of corrections.

Studio MINIM drafts permit sets for architects, engineers, building designers and contractors. You or your designer of record stay responsible for the design and the submission. We produce the sheets, keep them consistent with each other, and turn plan-check comments into revised sheets quickly.

What a typical permit set includes

Every jurisdiction has its own checklist, so we always start from the one that applies. Most residential and light commercial permit sets include:

  • Cover sheet with project data, sheet index, code summary and the applicable code editions.

  • Site plan with property lines, setbacks, easements, existing and new structures, and lot coverage.

  • Floor plans with dimensions, room uses, door and window schedules, and egress notes.

  • Exterior elevations with heights, materials and openings.

  • Building sections and wall sections showing assemblies, insulation and fire-rated construction where needed.

  • Roof plan with slopes and drainage.

  • Energy and accessibility notes, drawn from the compliance path your designer of record has chosen.

  • Details for stairs, guards, rated assemblies and other items reviewers ask about.

Structural, MEP and civil sheets are normally produced by those engineers. We can coordinate our architectural sheets with theirs and include their information where the jurisdiction expects it.

Codes and local amendments

We draft to the client's governing codes and local amendments. For US work that usually means the adopted IBC or IRC, the IECC, NFPA requirements where they apply, ADA and local accessibility rules, and for hotels, brand standards. Cities and counties amend these codes, and the amendment is often what triggers a correction. Tell us the jurisdiction and send its checklist, and we will build the set around it.

For Canadian projects see Permit drawings for Canada; for Australian projects see Drafting services for Australia.

Permit sets by project type

We have drafted permit-ready drawings for pools and spas, custom homes, home additions, ADUs, motels and hotels, and restoration work. These pages explain what each type needs:

Responding to plan-check comments

Corrections are normal. When the reviewer's comments come back, send them to us with any direction from your designer of record. We revise the affected sheets, cloud and tag the changes, and update the sheet index, so the resubmittal is easy for the reviewer to check.

Who seals and submits

We are a drafting and BIM production team. We are not your architect or engineer of record. Your licensed architect, engineer or designer reviews the set, seals or signs it where required, and submits it to the authority. We do not sign applications or deal with the building department on your behalf. We draft to the codes and local amendments that govern your project, as you or your designer of record direct.

Deliverables and file formats

You receive a PDF set ready for e-submittal or printing, plus the source DWG or RVT files. IFC exports are available when your consultants need them.

How a project runs

  1. Send a sample set. Share a recent drawing set, your mark-ups or the inputs you have, and tell us what you need back.

  2. Quote and schedule. We reply with the sheet list, the hours, the cost and a dated schedule.

  3. Set up. We load your title block, layers, text styles and Revit templates, or work to the standards you send.

  4. Draft and check. Sheets are drafted, then checked against your mark-ups and the checklist agreed at the start.

  5. Deliver and revise. You receive DWG, RVT, PDF or IFC files as agreed, and we turn your review comments into a revised set.

Team, rates and working hours

Studio MINIM's production team is 25 people, and the team is Revit-certified. Rates start from $35/hour. We confirm the hours and the cost for your set in a written quote before any work starts, so you know the number before you commit.

Our team works on IST (UTC+5:30), which is 10.5 hours ahead of US Eastern time and 13.5 hours ahead of Pacific time in winter. In practice, mark-ups you send at the end of your day are worked on while your office is closed, and review calls can be set for your morning.

Related pages

Frequently asked questions

Can you submit permit drawings to the city for us?

No. Your licensed architect, engineer or designer reviews, seals where required and submits the set. We produce and revise the drawings.

Which codes do your permit drawings follow?

The codes and local amendments that govern your project. For US work that is usually the adopted IBC or IRC, IECC, NFPA requirements and ADA, plus any local checklist.

Do you handle plan-check corrections?

Yes. Send us the reviewer comments and your direction, and we revise the affected sheets, cloud the changes and update the index for resubmittal.

What files will I receive?

A PDF set ready for submission, plus the DWG or RVT source files. IFC is available on request.

What does a permit set cost?

Rates start from $35/hour. Send a sample set and the jurisdiction checklist, and we will quote the hours and cost before work starts.

Project country
What do you need?
Project type
Files you need back
Anchor 1

+91-97140 00427

604, Silver Radiance, SBR, Near. Pakwan Cross road, Bodakdev, Ahmedabad - 380059

  • Instagram
  • Facebook
  • Youtube
  • LinkedIn
© 2026 Studio MINIM
bottom of page