top of page

As-Built Drawing Services for Renovation, Additions and Brand Upgrades

Every renovation, addition or brand upgrade starts with the same question: what is actually there? If the original drawings are missing, out of date or never matched the building, the design team has to start from an accurate as-built set.

Studio MINIM turns your field measurements, photos and scan data into existing-conditions drawings and models. You or your surveyor collect the data on site; we draw it up in DWG or Revit, ready for the design team.

What we produce

  • Existing floor plans with walls, openings, stairs, fixtures and room names.

  • Existing exterior elevations with openings, materials and key heights.

  • Building sections through the main spaces and stairs.

  • Roof plans showing slopes, equipment and drainage.

  • Reflected ceiling plans where ceiling heights and fixtures matter to the next design.

  • Revit existing-conditions models, if your design team works in BIM (see BIM and Revit modeling services).

The inputs that work

We work from the information you collect on site. The better the data, the more accurate the drawings.

  • Field sketches and tape or laser measurements, with photos keyed to the sketches.

  • Point clouds from a laser scan, if you have one. Send the registered scan and the area you need modeled.

  • Old drawings, even partial or hand-drawn ones, which help us understand structure and intent.

  • Photos and video walk-throughs, which help with fixtures, finishes and details.

When the data has gaps, we list the missing dimensions so your team can check them on the next visit, rather than guessing.

Where as-builts matter most

  • Hotel and motel renovations, including brand PIP work, where rooms, corridors and public areas must be measured before upgrades are designed. Our work includes Marriott-brand hotel projects and independent and franchise motels. See Hotel and motel drafting.

  • Historic buildings and restoration, where the existing fabric is the design brief. See Historic restoration drawings.

  • Home additions and ADUs, where the new work has to tie into the existing house. See ADU drafting.

Accuracy and checking

We draw what the data shows and record where we had to make an assumption. Each set is checked for closure of overall dimensions, consistent levels between plans and sections, and openings that match between plans and elevations.

Codes and standards

As-built drawings record existing conditions, so they are not drafted to a code in the same way as new work. When the next step is a permit set, we draft the new work to the client's governing codes and local amendments, such as the IBC or IRC, IECC, NFPA and ADA in the US.

Deliverables and file formats

DWG drawings on your layers and title block, RVT existing-conditions models, PDF sets for review, and IFC exports on request.

Who seals and submits

We are a drafting and BIM production team. We are not your architect or engineer of record. Your licensed architect, engineer or designer reviews the set, seals or signs it where required, and submits it to the authority. Field verification of existing conditions remains with your team or surveyor. We draft to the codes and local amendments that govern your project, as you or your designer of record direct.

How a project runs

  1. Send a sample set. Share a recent drawing set, your mark-ups or the inputs you have, and tell us what you need back.

  2. Quote and schedule. We reply with the sheet list, the hours, the cost and a dated schedule.

  3. Set up. We load your title block, layers, text styles and Revit templates, or work to the standards you send.

  4. Draft and check. Sheets are drafted, then checked against your mark-ups and the checklist agreed at the start.

  5. Deliver and revise. You receive DWG, RVT, PDF or IFC files as agreed, and we turn your review comments into a revised set.

Team, rates and working hours

Studio MINIM's production team is 25 people, and the team is Revit-certified. Rates start from $35/hour. We confirm the hours and the cost for your set in a written quote before any work starts, so you know the number before you commit.

Our team works on IST (UTC+5:30), which is 10.5 hours ahead of US Eastern time and 13.5 hours ahead of Pacific time in winter. In practice, mark-ups you send at the end of your day are worked on while your office is closed, and review calls can be set for your morning.

Related pages

Frequently asked questions

Can you create as-built drawings without visiting the site?

Yes, from the field measurements, photos, old drawings or point clouds your team collects. We do not carry out site surveys ourselves.

Can you work from a laser scan point cloud?

Yes. Send the registered point cloud and tell us which areas and level of detail you need.

Do you deliver as-builts in Revit?

Yes. We deliver DWG drawings, RVT existing-conditions models, PDF sets and IFC exports as agreed.

What does an as-built drawing set cost?

Rates start from $35/hour. Hours depend on the building size, the quality of the data and the level of detail, so we quote after reviewing your inputs.

Who verifies the as-built dimensions?

Field verification stays with your team or surveyor. We list any gaps or assumptions so they can be checked on site.

Project country
What do you need?
Project type
Files you need back
Anchor 1

+91-97140 00427

604, Silver Radiance, SBR, Near. Pakwan Cross road, Bodakdev, Ahmedabad - 380059

  • Instagram
  • Facebook
  • Youtube
  • LinkedIn
© 2026 Studio MINIM
bottom of page